WarmTransfer
webex calling · published

Cisco headsets and Webex App calling endpoints

Verified 2026-09-25 · 60 sources · tier 2

Cisco documents two primary platforms for administering its headsets: Cisco Unified Communications Manager and Webex Control Hub 36. The supported headset portfolio covers devices integrated across the Webex App, Cisco multiplatform phones (MPP), and Cisco Desk Phone 9800 Series endpoints 36​57​40​10.

Supported models and call controls

The Webex App headset support list includes 8 Cisco headset families: the 320, 520, 530, and 560 Series, the 720 Series, the 730, the Bang & Olufsen Cisco 950, and the Bang & Olufsen Cisco 980 57. The Webex App also supports call control from selected third-party headsets from Jabra, EPOS, Poly (Plantronics), and Yealink 60. However, Jabra headsets currently do not work on Webex VDI for Dell ThinOS 35.

Bluetooth wireless models include the Cisco Headset 720 Series, Cisco Headset 730, Bang & Olufsen Cisco 950, and Bang & Olufsen Cisco 980, all of which can also connect through a Cisco USB adapter 25. The Bang & Olufsen Cisco 950 connects to the Webex App through Bluetooth or the USB HD Adapter; direct USB cable connections are not supported 7. For the Cisco Headset 720 Series, raising the microphone boom mutes the call, and unmuting is blocked while the boom remains raised 3. Button actions on the Cisco Headset 720 Series depend on the device variant 6​4:

Variant Answer call End call Reject call
Webex 6 Press Webex button once Hold Webex button 2 seconds Press Webex button twice
Microsoft Teams 4 Single press of the Teams button Single press of the Teams button Hold Teams button 1 second

In the Webex desktop app, user-configurable headset settings are located under Settings > Accessories after selecting the headset model 59. For the Cisco Headset 320 and 530 Series, the Webex App compatibility guide lists hold and resume as available only when connected to Unified CM 58.

Multi-app behaviour

The multi-app feature routes headset button presses to a single calling application at a time rather than broadcasting them across every open application 45. This applies to Webex 41.8 or later and Jabber 14.1 or later 44. Multi-app control functions only over Bluetooth or USB cable connections with Webex and Jabber 46. Under multi-app control, answering an incoming call in a secondary application does not automatically place the active call on hold 48. Multi-app support requires specific minimum firmware versions across supported headset series 47:

  • Cisco Headset 320 Series requires 2.4(1) or later 47.
  • Cisco Headset 520 and 530 Series require 2.3(1) or later 47.
  • Cisco Headset 560 Series requires 2.1(1) or later 47.
  • Cisco Headset 730 requires 1-6-0-150 or later 47.

Control Hub administration and inventory

The Webex Control Hub headset inventory tracks individual Cisco headsets connected to the Webex App, Webex Meetings, and the Cisco Accessory Hub desktop app 31. Each inventory entry displays the headset model, serial number, firmware version, connection status, and connection duration 29. Administrators can generate an inventory report or delete single headsets and groups of headsets from the organization's inventory 30​28. Managing headset details in Control Hub requires an administrator role with device management permissions 26.

Control Hub provides 2 firmware release channels: Stable (TAC-supported and containing tested releases) and Beta (not TAC-supported, providing software for early field trials) 33​34. When a Cisco headset connects to the Webex App or to a Webex-authenticated Cisco Accessory Hub desktop app, the application verifies the headset model and firmware, prompting the user if an upgrade is available 21.

Configurations can be applied to individual headsets via All Configurations on the device page, or in bulk by selecting multiple headsets and choosing Edit > Device Configurations 27. For the Cisco Headset 560 Series, Control Hub provides parameters beyond the 320, 520, and 530 Series: Bandwidth (default Wide Band), Conference (default Enable), Bluetooth (default On), and Radio Range (default Medium range) 2. The Cisco Headset 560 Series Conference setting permits up to 3 guest headsets to pair with the base 2​1.

Cisco Accessory Hub desktop app

Cisco Accessory Hub configures settings, manages firmware updates for Cisco headsets, desk cameras, and USB adapters, and registers devices to Webex Control Hub 15. Beginning in version 2.2.0.162 (August 2024), connected headsets and cameras register to the signed-in user in Control Hub 16. Version 3.0.0.314 (January 2025) added pairing and history management for the Cisco Headset USB-C Adapter, and version 4.2.0.410 (January 2026) introduced an MSI installer package 17​14.

To update a headset in the desktop app, users select Accessories, choose the headset, open Headset info, and select Start update, with the option to specify a local firmware file 20. Cisco advises against running the desktop and web versions of Accessory Hub simultaneously during an update to avoid upgrade issues 19.

USB adapters and wireless pairing

Cisco offers the USB HD Adapter and the USB-C Adapter for wireless headsets 53​18. The Cisco Headset USB HD Adapter ships pre-paired with its headset, whereas standalone USB-C Adapters require manual pairing 53. Re-pairing the USB HD Adapter involves holding its Pair button for 4 seconds until the LED blinks blue 54. The USB-C Adapter is paired using Start Pair in the Accessory Hub application and stores up to 8 connection history records 54​55. Firmware updates for Cisco wireless headsets are not supported through either the USB HD Adapter or the USB-C Adapter 18.

Hardware endpoint support

Cisco Unified Communications Manager

Unified CM administrators can remotely configure headset parameters, including Bluetooth state, audio bandwidth, and wireless power range 52. Deployment requires activating the Cisco Headset Service, installing headset COP files containing firmware and configuration data, creating user profiles, and assigning profiles to users 50​49. For configuration templates to apply, end users must be associated with User Profiles and their endpoint MAC addresses must be designated as controlled devices 51.

Multiplatform phones (MPP)

Cisco states that Cisco headsets require no administrative intervention on multiplatform phones running the latest phone firmware; the headset downloads necessary software on initial connection 40. Multiplatform phones support headsets starting at specific firmware releases 37​38​39:

  • Cisco Headset 520 and 530 Series: Multiplatform Firmware Release 11.1.2 or later 37
  • Cisco Headset 560 Series: Multiplatform Firmware Release 11.2.3 or later 38
  • Cisco Headset 730: Multiplatform Firmware Release 11.3.5 or later 39

Upgrades are configured under Voice > Provisioning > Cisco Headset Firmware Upgrade as a single string containing the protocol (HTTP or TFTP), server address, and the headset XML file 42. Cisco states that the headset XML file contents should not be altered 41. An upgrade triggers when the headset USB adapter is connected and the XML version is newer than the headset software, taking approximately 10 minutes 43. Phone resets do not erase headset configurations 41.

Cisco Desk Phone 9800 Series

On the Cisco Desk Phone 9800 Series, the Cisco Headset 720 Series and 730 require headset firmware 1-12-0-154 or later and connect over Bluetooth, USB, or USB adapter 10. 720 Series firmware upgrades require a direct USB connection on both 9800 Series phones and the Webex App 5​11. When connected to a 9800 Series phone, the Bang & Olufsen Cisco 950 and 980 do not support hold and resume from the headset 12. Cisco Headset 530 Series units connected via RJ-9 lack call controls, which function only over USB 8. Remote configuration of the 560 Series on 9800 Series phones requires Unified CM 12.5(1)SU3 or later 9. To prevent overcurrent issues with Cisco Bluetooth headsets on the Cisco Desk Phone 9841, Cisco advises connecting through the USB dongle or ensuring the headset is fully charged prior to connection 13.

See also

See also Webex Calling supported devices and MPP firmware.

Applicability

Applies to: Cisco Headsets, Cisco Webex App, Cisco IP Phone multiplatform firmware, Cisco Desk Phone 9800 Series, Cisco Webex App VDI, Cisco Headset 950, Cisco Headset 720 Series, Cisco Webex Control Hub, Cisco Headset 560 Series, Cisco Accessory Hub, Cisco Headset USB adapters, Cisco Headset USB-C Adapter, Cisco Unified Communications Manager, and Cisco Desk Phone 9841. Deployments: on-premises, multi-tenant, third-party-call-control, and vdi. Sources checked 2026-09-25. The Cisco Headset 720 Series and Cisco Headset 730 on the Webex App are supported on Windows and Mac, but not on Linux VDI 56. Minimum multiplatform phone firmware requirements are release 11.1.2 for the 520 and 530 Series, 11.2.3 for the 560 Series, and 11.3.5 for the 730 37​38​39. On the Cisco Desk Phone 9800 Series, the 720 Series and 730 require headset firmware 1-12-0-154 or later 10. Remote configuration of the 560 Series requires Unified CM 12.5(1)SU3 or later 9. Cisco Accessory Hub features require version 2.2.0.162 or later for Control Hub user registration, 3.0.0.314 or later for USB-C adapter pairing, and 4.2.0.410 or later for the MSI package 16​17​14. The multi-app feature requires Webex 41.8 or later and Jabber 14.1 or later 44.

What remains uncertain

Whether third-party headsets support remote firmware management or parameter configuration through Webex Control Hub is not covered by the sources below.

Sources

  1. 1
    The Cisco Headset 560 Series Conference setting allows up to three guest headsets to pair with the base.
    Customize Cisco headsets features in Control Hub · Cisco headset configuration parameters (Cisco Headset 560 Series table, Conference row) · Checked 2026-09-25
  2. 2
    For the Cisco Headset 560 Series, Control Hub adds Bandwidth (default Wide Band), Conference (default Enable), Bluetooth (default On) and Radio Range (default Medium range) parameters beyond those of the 320/520/530 Series.
    Customize Cisco headsets features in Control Hub · Cisco headset configuration parameters (Cisco Headset 560 Series table) · Checked 2026-09-25
  3. 3
    On the Cisco Headset 720 Series, raising the microphone boom mutes the call and the microphone cannot be unmuted while the boom is up.
    Call controls on the Cisco Headset 720 Series · Mute rows and note · Checked 2026-09-25
  4. 4
    On a Microsoft Teams-variant Cisco Headset 720, a single press of the Teams button answers or ends a call, while holding it for one second rejects an incoming call.
    Call controls on the Cisco Headset 720 Series · Microsoft Teams call controls table · Checked 2026-09-25
  5. 5
    With the Webex App, a Cisco Headset 720 Series user is notified when an upgrade is available but needs the USB cable connected to complete the upgrade.
    Cisco Headset Compatibility Guide - Webex App [Cisco Headset 500 Series] · Cisco Headset 720 Series section, headset upgrade row · Checked 2026-09-25
  6. 6
    On a Webex-variant Cisco Headset 720, pressing the Webex button once answers a call, holding it for two seconds ends the call and pressing it twice rejects an incoming call.
    Call controls on the Cisco Headset 720 Series · Webex call controls table · Checked 2026-09-25
  7. 7
    The Bang & Olufsen Cisco 950 connects to the Webex App through the USB HD Adapter or Bluetooth; a direct USB connection is not supported.
    Cisco Headset Compatibility Guide - Webex App [Cisco Headset 500 Series] · Bang & Olufsen Cisco 950 section, connection row · Checked 2026-09-25
  8. 8
    On the Cisco Desk Phone 9800 Series, a Cisco Headset 530 Series connected by RJ-9 has no headset call controls; call controls work only over USB.
    Cisco Headset Compatibility Guide - Cisco Desk Phone 9800 Series [Cisco Headset 500 Series] · Cisco Headset 530 Series, call-control rows · Checked 2026-09-25
  9. 9
    The 9800 Series compatibility guide ties remote configuration of the Cisco Headset 560 Series to Unified CM 12.5(1)SU3 or later.
    Cisco Headset Compatibility Guide - Cisco Desk Phone 9800 Series [Cisco Headset 500 Series] · Cisco Headset 560 Series, remote configuration row · Checked 2026-09-25
  10. 10
    On the Cisco Desk Phone 9800 Series, the Cisco Headset 720 Series and 730 require headset firmware 1-12-0-154 or later and connect by USB, USB adapter or Bluetooth.
    Cisco Headset Compatibility Guide - Cisco Desk Phone 9800 Series [Cisco Headset 500 Series] · Cisco Headset 720 Series; Cisco Headset 730 · Checked 2026-09-25
  11. 11
    On the Cisco Desk Phone 9800 Series, Cisco Headset 720 Series upgrades are supported only over a direct USB connection.
    Cisco Headset Compatibility Guide - Cisco Desk Phone 9800 Series [Cisco Headset 500 Series] · Cisco Headset 720 Series, headset upgrade row · Checked 2026-09-25
  12. 12
    On the Cisco Desk Phone 9800 Series, hold/resume from the headset is not supported for the Bang & Olufsen Cisco 950 or 980.
    Cisco Headset Compatibility Guide - Cisco Desk Phone 9800 Series [Cisco Headset 500 Series] · Bang & Olufsen Cisco 950; Bang & Olufsen Cisco 980, hold/resume rows · Checked 2026-09-25
  13. 13
    To prevent overcurrent problems with Cisco Bluetooth headsets on the Cisco Desk Phone 9841, Cisco advises connecting through the USB dongle or fully charging the headset first.
    Cisco Headset Compatibility Guide - Cisco Desk Phone 9800 Series [Cisco Headset 500 Series] · Note under the headset tables · Checked 2026-09-25
  14. 14
    Cisco Accessory Hub desktop app 4.2.0.410 (January 2026) introduced a Microsoft software installer (MSI) package.
    Cisco Accessory Hub desktop app release notes · January 2026 | Version 4.2.0.410 · Checked 2026-09-25
  15. 15
    Cisco Accessory Hub is a desktop app for configuring settings and updating firmware on Cisco headsets, desk cameras and USB adapters, and for registering those devices with Webex Control Hub.
    Cisco Accessory Hub desktop app release notes · Introduction (above the release list) · Checked 2026-09-25
  16. 16
    From Cisco Accessory Hub 2.2.0.162 (August 2024), a connected Cisco headset or camera registers to the signed-in user in Control Hub.
    Cisco Accessory Hub desktop app release notes · August 2024 | Version 2.2.0.162 · Checked 2026-09-25
  17. 17
    Cisco Accessory Hub 3.0.0.314 (January 2025) added pairing of the Cisco Headset USB-C Adapter to a Cisco Bluetooth headset and management of its pairing history.
    Cisco Accessory Hub desktop app release notes · January 2025 | Version 3.0.0.314 · Checked 2026-09-25
  18. 18
    Firmware updates for Cisco wireless headsets are not supported through the USB-C Adapter or the USB HD Adapter.
    Cisco Headset USB Adapter · Use the Cisco Headset USB-C Adapter; Use the Cisco Headset USB HD Adapter (notes) · Checked 2026-09-25
  19. 19
    Cisco advises not to run the Cisco Accessory Hub desktop app and the Accessory Hub web app at the same time while upgrading a headset, to avoid upgrade issues.
    Update your headset in the Cisco Accessory Hub desktop app · Note in the update procedure · Checked 2026-09-25
  20. 20
    To update a headset in the Accessory Hub desktop app the user selects Accessories, chooses the headset, opens Headset info and clicks Start update, optionally selecting a local firmware file instead.
    Update your headset in the Cisco Accessory Hub desktop app · Update procedure, steps 1-5 · Checked 2026-09-25
  21. 21
    When a Cisco headset is connected to the Webex App, or to the Cisco Accessory Hub desktop app signed in to a Webex account, the app checks the headset model and firmware version and prompts the user to upgrade if newer firmware is available.
    Customize Cisco headsets features in Control Hub · Manage headset firmware in Control Hub · Checked 2026-09-25
  22. 22
    Control Hub lists firmware management settings among the configurable parameters for the Bang & Olufsen Cisco 950 and 980.disputed
    Customize Cisco headsets features in Control Hub · Cisco headset configuration parameters (Bang & Olufsen Cisco 950 and 980 table) · Checked 2026-09-25
  23. 23
    Cisco Accessory Hub desktop app 2.2.0.162 (August 2024) added configuration and firmware updates for the Bang & Olufsen Cisco 980 headset and 950 earbuds.disputed
    Cisco Accessory Hub desktop app release notes · August 2024 | Version 2.2.0.162 · Checked 2026-09-25
  24. 24
    The Webex App compatibility guide states that headset upgrades are not supported for the Bang & Olufsen Cisco 950 and 980, and that these models do not support remote configuration or firmware upgrade from Control Hub.disputed
    Cisco Headset Compatibility Guide - Webex App [Cisco Headset 500 Series] · Bang & Olufsen Cisco 950 and 980 sections, headset upgrade rows; Control Hub serviceability summary · Checked 2026-09-25
  25. 25
    The Cisco Headset 720 Series, Cisco Headset 730, Bang & Olufsen Cisco 950 and Bang & Olufsen Cisco 980 are Bluetooth wireless models that can also be used through a Cisco USB adapter.
    Cisco Headset administration · Cisco Headsets Overview (series list) · Checked 2026-09-25
  26. 26
    Viewing and changing headset information in Control Hub requires an administrator role with permission to manage devices.
    Headset Administration in Control Hub · View headset inventory in Control Hub (before you begin) · Checked 2026-09-25
  27. 27
    Headset settings can be changed for a single headset from All Configurations on its device page, and for many headsets at once by selecting them, choosing Edit, then Device Configurations, and applying the change.
    Customize Cisco headsets features in Control Hub · Configure settings for a single headset; Configure settings for a group of headsets · Checked 2026-09-25
  28. 28
    Control Hub lets an administrator delete a single headset or a group of headsets from the organisation's inventory.
    Headset Administration in Control Hub · Delete a headset from Control Hub; Delete a group of headsets from Control Hub · Checked 2026-09-25
  29. 29
    A headset entry in Control Hub shows the headset model, serial number, firmware version, connection status and how long the headset has been connected.
    Headset Administration in Control Hub · View headset inventory in Control Hub · Checked 2026-09-25
  30. 30
    Administrators can generate a headset inventory report from Control Hub.
    Headset Administration in Control Hub · Generate a headset inventory report in Control Hub · Checked 2026-09-25
  31. 31
    The Control Hub headset inventory lists individual Cisco headsets connected to the Webex App, Webex Meetings and the Cisco Accessory Hub desktop app.
    Headset Administration in Control Hub · View headset inventory in Control Hub · Checked 2026-09-25
  32. 32
    Control Hub headset management appears to depend on the headset being attached to a Webex App, Webex Meetings or Accessory Hub client; the reviewed Cisco pages do not say that a headset plugged into a Webex Calling multiplatform desk phone appears in the Control Hub headset inventory.inferred
    Headset Administration in Control Hub · View headset inventory in Control Hub (list of connecting clients) · Checked 2026-09-25
  33. 33
    Control Hub offers two headset firmware channels: Stable, which delivers the most recently tested and released version, and Beta, which delivers software for early field trials of features under development.
    Customize Cisco headsets features in Control Hub · Manage headset firmware in Control Hub · Checked 2026-09-25
  34. 34
    Only the Stable headset firmware channel is supported by Cisco TAC; the Beta channel is not TAC-supported.
    Customize Cisco headsets features in Control Hub · Manage headset firmware in Control Hub · Checked 2026-09-25
  35. 35
    The Webex App headset support page notes that Jabra headsets currently do not work on Webex VDI for Dell ThinOS.
    Webex App | Headset support · Jabra section, note · Checked 2026-09-25
  36. 36
    Cisco documents two administration platforms for Cisco headsets: Cisco Unified Communications Manager and Webex Control Hub.
    Cisco Headset administration · Cisco Headsets Overview · Checked 2026-09-25
  37. 37
    The Cisco Headset 520 and 530 Series require Multiplatform Firmware Release 11.1.2 or later on multiplatform phones.
    Headset management on multiplatform phones · Supported headsets list · Checked 2026-09-25
  38. 38
    The Cisco Headset 560 Series requires Multiplatform Firmware Release 11.2.3 or later on multiplatform phones.
    Headset management on multiplatform phones · Supported headsets list · Checked 2026-09-25
  39. 39
    The Cisco Headset 730 requires Multiplatform Firmware Release 11.3.5 or later on multiplatform phones.
    Headset management on multiplatform phones · Supported headsets list · Checked 2026-09-25
  40. 40
    Cisco states that Cisco headsets need no administration on multiplatform phones once the latest phone firmware is installed, and that a headset downloads its required firmware when it first connects.
    Headset management on multiplatform phones · Headset management overview · Checked 2026-09-25
  41. 41
    Headset settings are not erased by a multiplatform phone reset, and Cisco says the contents of the headset XML file should not be modified.
    Headset management on multiplatform phones · Upgrade headset firmware on multiplatform phones (notes) · Checked 2026-09-25
  42. 42
    On multiplatform phones the headset firmware upgrade rule is set under Voice > Provisioning > Cisco Headset Firmware Upgrade as a single string naming the protocol (HTTP or TFTP), the server address and the headset XML file.
    Headset management on multiplatform phones · Upgrade headset firmware on multiplatform phones (procedure) · Checked 2026-09-25
  43. 43
    On a multiplatform phone the headset upgrade starts when the headset USB adapter is plugged into the phone and the XML file version is newer than the headset's software, and takes about 10 minutes.
    Headset management on multiplatform phones · Upgrade headset firmware on multiplatform phones (procedure) · Checked 2026-09-25
  44. 44
    The Cisco Headset multi-app feature applies to Webex 41.8 or later and Jabber 14.1 or later.
    Cisco Headset multi-app feature · Supported applications · Checked 2026-09-25
  45. 45
    With the Cisco Headset multi-app feature, headset button presses affect only one calling application at a time instead of being broadcast to every open application.
    Cisco Headset multi-app feature · Overview · Checked 2026-09-25
  46. 46
    Multi-app control is available only with Webex and Jabber over Bluetooth or the USB cable.
    Cisco Headset multi-app feature · Connectivity / limitations · Checked 2026-09-25
  47. 47
    Multi-app control requires headset firmware 2.4(1) or later on the 320 Series, 2.3(1) or later on the 520 and 530 Series, 2.1(1) or later on the 560 Series and 1-6-0-150 or later on the 730.
    Cisco Headset multi-app feature · Supported headsets and firmware table · Checked 2026-09-25
  48. 48
    With multi-app control, an active call is not automatically put on hold when the user answers an incoming call in a different application.
    Cisco Headset multi-app feature · Limitations · Checked 2026-09-25
  49. 49
    In Unified CM, headset firmware is installed and upgraded through COP files that contain the firmware versions of the different headset models along with their configuration data.
    Headset administration in Cisco Unified Communications Manager · Prepare your headset COP files · Checked 2026-09-25
  50. 50
    The Unified CM headset workflow starts with activating the Cisco Headset Service, then preparing headset COP files, configuring profiles for headset users and applying user profiles to end users.
    Headset administration in Cisco Unified Communications Manager · Workflow configure serviceability; section order · Checked 2026-09-25
  51. 51
    For Unified CM headset template changes to apply, end users must be associated with User Profiles and their device MAC addresses must be added as controlled devices.
    Headset administration in Cisco Unified Communications Manager · Apply user profiles to end users · Checked 2026-09-25
  52. 52
    Unified CM administrators can remotely configure headset settings such as wireless power range, audio bandwidth and Bluetooth on/off through Unified CM Administration.
    Headset administration in Cisco Unified Communications Manager · Headset management overview · Checked 2026-09-25
  53. 53
    The Cisco Headset USB HD Adapter ships pre-paired to its headset, whereas a separately purchased USB-C Adapter must be paired manually.
    Cisco Headset USB Adapter · Use the Cisco Headset USB HD Adapter; Pair the Cisco Headset USB-C Adapter to your headset · Checked 2026-09-25
  54. 54
    To re-pair the USB HD Adapter, hold its Pair button for four seconds until the LED blinks blue; the USB-C Adapter is paired from the Cisco Accessory Hub web or desktop app using Start Pair.
    Cisco Headset USB Adapter · Pair the Cisco Headset USB HD Adapter to your headset; Pair the Cisco Headset USB-C Adapter to your headset · Checked 2026-09-25
  55. 55
    The Cisco Headset USB-C Adapter stores up to eight connection history records.
    Cisco Headset USB Adapter · Pair the Cisco Headset USB-C Adapter to your headset · Checked 2026-09-25
  56. 56
    With the Webex App, the Cisco Headset 720 Series and Cisco Headset 730 are supported on Windows and Mac but not on Linux VDI.
    Cisco Headset Compatibility Guide - Webex App [Cisco Headset 500 Series] · Cisco Headset 720 Series and Cisco Headset 730 sections, OS row · Checked 2026-09-25
  57. 57
    The Webex App headset support page lists eight Cisco headset families: 320, 520, 530 and 560 Series, 720 Series, 730, Bang & Olufsen Cisco 950 and Bang & Olufsen Cisco 980.
    Webex App | Headset support · Cisco headsets section · Checked 2026-09-25
  58. 58
    The Webex App compatibility guide lists hold/resume from the Cisco Headset 320 and 530 Series as available only on devices connected to Unified CM.
    Cisco Headset Compatibility Guide - Webex App [Cisco Headset 500 Series] · Cisco Headset 320 Series and Cisco Headset 530 Series sections, hold/resume row · Checked 2026-09-25
  59. 59
    In the Webex desktop app, Cisco headset settings are under Settings > Accessories, where the user selects the headset model.
    Cisco Headset settings in Webex App · Opening section (access headset settings) · Checked 2026-09-25
  60. 60
    The Webex App supports call control from selected third-party headsets from Jabra, EPOS, Poly (Plantronics) and Yealink, listed model by model.
    Webex App | Headset support · Third-party headsets sections (Jabra, EPOS, Poly, Yealink) · Checked 2026-09-25

Documents

tier 2 current vendor documentation

Call controls on the Cisco Headset 720 Series

Cisco Webex Help Center · 2024-09-25 · accessed 2026-09-25

tier 2 current vendor documentation

Cisco Accessory Hub desktop app release notes

Cisco Webex Help Center · 2026-01-26 · accessed 2026-09-25

tier 2 current vendor documentation

Cisco Headset administration

Cisco Webex Help Center · 2024-09-26 · accessed 2026-09-25

tier 2 current vendor documentation

Cisco Headset Compatibility Guide - Cisco Desk Phone 9800 Series [Cisco Headset 500 Series]

Cisco Systems · 2026-07-21 · accessed 2026-09-25

tier 2 current vendor documentation

Cisco Headset Compatibility Guide - Webex App [Cisco Headset 500 Series]

Cisco Systems · 2024-03-05 · accessed 2026-09-25

tier 2 current vendor documentation

Cisco Headset multi-app feature

Cisco Webex Help Center · 2024-09-14 · accessed 2026-09-25

tier 2 current vendor documentation

Cisco Headset settings in Webex App

Cisco Webex Help Center · 2026-01-14 · accessed 2026-09-25

tier 2 current vendor documentation

Cisco Headset USB Adapter

Cisco Webex Help Center · 2025-02-28 · accessed 2026-09-25

tier 2 current vendor documentation

Customize Cisco headsets features in Control Hub

Cisco Webex Help Center · 2025-06-03 · accessed 2026-09-25

tier 2 current vendor documentation

Headset administration in Cisco Unified Communications Manager

Cisco Webex Help Center · 2026-02-24 · accessed 2026-09-25

tier 2 current vendor documentation

Headset Administration in Control Hub

Cisco Webex Help Center · 2025-07-10 · accessed 2026-09-25

tier 2 current vendor documentation

Headset management on multiplatform phones

Cisco Webex Help Center · 2024-09-14 · accessed 2026-09-25

tier 2 current vendor documentation

Update your headset in the Cisco Accessory Hub desktop app

Cisco Webex Help Center · 2025-06-16 · accessed 2026-09-25

tier 2 current vendor documentation

Webex App | Headset support

Cisco Webex Help Center · 2026-06-17 · accessed 2026-09-25

Cite this page

APA

WarmTransfer. (2026, September 25). Cisco headsets and Webex App calling endpoints. WarmTransfer. https://warmtransfer.net/knowledge/cisco-headsets-endpoints

BibTeX

@misc{warmtransfer-cisco-headsets-endpoints,
  title  = {Cisco headsets and Webex App calling endpoints},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/cisco-headsets-endpoints},
  note   = {Verified 2026-09-25}
}