Device Located behind NAT (Mediant 500 SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-500-sbc/user-manual/version-760/Content/UM/Device-Located-behind-NAT.htm

Published

2026-10-01

Updated

unknown

Accessed

2026-10-01

HTTP status

200

License

AudioCodes copyright; no-redistribution; short excerpts and locators only

Source notes citing this source

• With static IP authentication the address the carrier sees is the SBC's NAT address if one is configured and otherwise the interface address, so that address is the one to give the carrier for its allow list. inferred in context
• If no NAT address is configured, the SBC sends packets using the IP address configured for the interface in the IP Interfaces table. in context
• When the SBC sits behind NAT, its public address is configured either as a single Static NAT IP Address for all interfaces or per IP interface in the NAT Translation table, and the static address takes priority if both are set. in context

Cite this source record

APA

WarmTransfer. (2026, October 1). Device Located behind NAT (Mediant 500 SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-m500-76-device-behind-nat

BibTeX

@misc{warmtransfer-audiocodes-m500-76-device-behind-nat,
  title  = {Device Located behind NAT (Mediant 500 SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-m500-76-device-behind-nat},
  note   = {AudioCodes, accessed 2026-10-01}
}