Source note · Setting up a carrier SIP trunk on an AudioCodes SBC
With static IP authentication the address the carrier sees is the SBC's NAT address if one is configured and otherwise the interface address, so that address is the one to give the carrier for its allow list.
inferred · Checked 2026-10-01
- Vendor
- AudioCodes
- Product
- Mediant 500 SBC
- Subsystem
- NAT
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 7.6
- Status
- inferred
- Checked
- 2026-10-01
Sources
- Device Located behind NAT (Mediant 500 SBC User's Manual Version 7.6) — AudioCodes · tier 2 current vendor documentation · Device Located behind NAT, configuration methods and fallback paragraph
Cite this note
APA
WarmTransfer. (2026, October 1). Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-inf-ipauth-source-address. WarmTransfer. https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-inf-ipauth-source-address
BibTeX
@misc{warmtransfer-claim-audiocodes-carrier-sip-trunk-setup-inf-ipauth-source-address,
title = {Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-inf-ipauth-source-address},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-inf-ipauth-source-address},
note = {Source note audiocodes-carrier-sip-trunk-setup-inf-ipauth-source-address, checked 2026-10-01}
}