Source note · Setting up a carrier SIP trunk on an AudioCodes SBC
When the SBC sits behind NAT, its public address is configured either as a single Static NAT IP Address for all interfaces or per IP interface in the NAT Translation table, and the static address takes priority if both are set.
Checked 2026-10-01
- Vendor
- AudioCodes
- Product
- Mediant 500 SBC
- Subsystem
- NAT
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 7.6
- Checked
- 2026-10-01
Sources
- Device Located behind NAT (Mediant 500 SBC User's Manual Version 7.6) — AudioCodes · tier 2 current vendor documentation · Device Located behind NAT, configuration methods list
Cite this note
APA
WarmTransfer. (2026, October 1). Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-nat-two-methods. WarmTransfer. https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-nat-two-methods
BibTeX
@misc{warmtransfer-claim-audiocodes-carrier-sip-trunk-setup-nat-two-methods,
title = {Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-nat-two-methods},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-nat-two-methods},
note = {Source note audiocodes-carrier-sip-trunk-setup-nat-two-methods, checked 2026-10-01}
}