Source note · Setting up a carrier SIP trunk on an AudioCodes SBC
If no NAT address is configured, the SBC sends packets using the IP address configured for the interface in the IP Interfaces table.
Checked 2026-10-01
- Vendor
- AudioCodes
- Product
- Mediant 500 SBC
- Subsystem
- NAT
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 7.6
- Checked
- 2026-10-01
Sources
- Device Located behind NAT (Mediant 500 SBC User's Manual Version 7.6) — AudioCodes · tier 2 current vendor documentation · Device Located behind NAT, fallback paragraph
Cite this note
APA
WarmTransfer. (2026, October 1). Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-nat-fallback-interface. WarmTransfer. https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-nat-fallback-interface
BibTeX
@misc{warmtransfer-claim-audiocodes-carrier-sip-trunk-setup-nat-fallback-interface,
title = {Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-nat-fallback-interface},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-nat-fallback-interface},
note = {Source note audiocodes-carrier-sip-trunk-setup-nat-fallback-interface, checked 2026-10-01}
}