Configure Device Pack on Cisco Call Manager

Publisher

Cisco Systems (TAC)

URL

https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/213290-configure-device-pack-on-cisco-call-mana.html

Published

2018-04-27

Updated

unknown

Accessed

2026-09-25

HTTP status

200

License

Cisco copyright; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• According to a 2018 TAC note, installing a device pack for new device support on Unified CM 11.0(1) and earlier requires a cluster-wide reboot, whereas 11.5(1) and later require service restarts instead. in context
• The TAC device pack procedure copies the current Device Defaults firmware values before installation and restores them afterwards so phones are not upgraded unintentionally. in context

Cite this source record

APA

WarmTransfer. (2018, April 27). Configure Device Pack on Cisco Call Manager. WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-technote-213290-configure-device-pack

BibTeX

@misc{warmtransfer-cisco-technote-213290-configure-device-pack,
  title  = {Configure Device Pack on Cisco Call Manager},
  author = {{WarmTransfer}},
  year   = {2018},
  url    = {https://warmtransfer.net/knowledge/sources/cisco-technote-213290-configure-device-pack},
  note   = {Cisco Systems (TAC), accessed 2026-09-25}
}