Configure CUCM Integration with Paging Server (InformaCast)

Publisher

Cisco Systems

URL

https://www.cisco.com/c/en/us/support/docs/unified-communications/paging-server/117059-configure-informacast-00.html

Published

2026-03-19

Updated

unknown

Accessed

2026-09-25

HTTP status

200

License

Cisco copyright; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• The phone authentication URL and secure authentication URL must both be set to the same HTTP URL pointing to InformaCast. in context
• Basic Paging is limited to live audio broadcasts; pre-recorded audio and text messages belong to Advanced Notification. in context
• A caller who gets a busy signal when dialling the paging number usually has a calling search space or partition problem. in context
• A live broadcast starts when a user dials a predefined number that routes to InformaCast either through a route pattern and SIP trunk or through a CTI route point. in context
• InformaCast maps the called number to a recipient group of phones. in context
• The only InformaCast mode Cisco TAC supports is Basic Paging; other features need Singlewire support. in context
• Under an OEM agreement with Singlewire, Cisco TAC supports InformaCast from version 8.3 with CUCM 8.5 and later. in context
• InformaCast tells each phone in the recipient group to join a multicast stream by sending it an HTTP XSI command; InformaCast is the multicast source. in context

Cite this source record

APA

WarmTransfer. (2026, March 19). Configure CUCM Integration with Paging Server (InformaCast). WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-technote-117059-informacast-cucm

BibTeX

@misc{warmtransfer-cisco-technote-117059-informacast-cucm,
  title  = {Configure CUCM Integration with Paging Server (InformaCast)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/cisco-technote-117059-informacast-cucm},
  note   = {Cisco Systems, accessed 2026-09-25}
}