Cisco Unified Communications Manager SIP Integration Guide for Cisco Unity Connection Release 15 - Testing the Integration

Publisher

Cisco Systems

URL

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/15/integration/cucm_sip/b_15cucintcucmsip/b_15cucintcucmsip_chapter_011.html

Published

2024-10-01

Updated

unknown

Accessed

2026-09-25

HTTP status

200

License

Cisco proprietary documentation; no-redistribution; short excerpts and locators only

Source notes citing this source

• In the release-transfer test, leaving a message for the unanswered Phone 1 should turn its MWI on, and deleting the message after retrieving it should turn the MWI off. in context
• During testing, port activity is watched with Port Monitor, opened from the Unity Connection menu, by selecting Start Polling. in context
• Cisco's integration test uses two test phones on the same phone system, with Phone 1 forwarding unanswered calls to the Unity Connection pilot after no fewer than four rings, and a test user on Phone 1's extension with MWIs enabled. in context
• In the supervised-transfer test with three rings to wait, the caller hears no ringback (is on hold), the port stays Busy during supervision, and the greeting plays after three unanswered rings. in context

Cite this source record

APA

WarmTransfer. (2024, October 1). Cisco Unified Communications Manager SIP Integration Guide for Cisco Unity Connection Release 15 - Testing the Integration. WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-cuc15-sip-testing

BibTeX

@misc{warmtransfer-cisco-cuc15-sip-testing,
  title  = {Cisco Unified Communications Manager SIP Integration Guide for Cisco Unity Connection Release 15 - Testing the Integration},
  author = {{WarmTransfer}},
  year   = {2024},
  url    = {https://warmtransfer.net/knowledge/sources/cisco-cuc15-sip-testing},
  note   = {Cisco Systems, accessed 2026-09-25}
}