Source note · Integrating Unity Connection with Unified CM

Cisco's integration test uses two test phones on the same phone system, with Phone 1 forwarding unanswered calls to the Unity Connection pilot after no fewer than four rings, and a test user on Phone 1's extension with MWIs enabled.

Checked 2026-09-25

The phone system must forward calls to the Unity Connection pilot number in no fewer than four rings

Vendor: Cisco
Product: Cisco Unity Connection
Subsystem: testing
Deployment: on-premises
Region: not restricted
Release range: Unity Connection 15
Checked: 2026-09-25

Sources

Cisco Unified Communications Manager SIP Integration Guide for Cisco Unity Connection Release 15 - Testing the Integration — Cisco Systems · tier 2 current vendor documentation · Testing the Integration, setting up the test configuration

Cite this note

APA

WarmTransfer. (2026, September 25). Integrating Unity Connection with Unified CM: source note unity-connection-cucm-integration-setup-test-setup. WarmTransfer. https://warmtransfer.net/knowledge/claims/unity-connection-cucm-integration-setup-test-setup

BibTeX

@misc{warmtransfer-claim-unity-connection-cucm-integration-setup-test-setup,
  title  = {Integrating Unity Connection with Unified CM: source note unity-connection-cucm-integration-setup-test-setup},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/claims/unity-connection-cucm-integration-setup-test-setup},
  note   = {Source note unity-connection-cucm-integration-setup-test-setup, checked 2026-09-25}
}

Read in context