Configuring TLS for Secured SIP (Mediant Software SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring-TLS-for-SIP.htm

Published

2026-10-01

Updated

unknown

Accessed

2026-10-01

HTTP status

200

License

AudioCodes copyright; no-redistribution; short excerpts and locators only

Source notes citing this source

• TLS mutual authentication is optional and is enabled with the 'TLS Mutual Authentication' check box (SIPSRequireClientCertificate) under Setup > IP Network > Security > Security Settings. in context
• For a TLS trunk, the Proxy Set's Transport Type must be set to TLS rather than UDP. in context
• To use SIP over TLS toward an IP Group, the manual's procedure is to configure a TLS Context, assign it to the Proxy Set or SIP Interface associated with that IP Group, and configure a TLS port on the SIP Interface. in context
• By default the SBC initiates TLS only for the next network hop; the 'SIPS' check box (EnableSIPS) under SIP Definitions > Transport Settings is for multi-hop TLS. in context

Cite this source record

APA

WarmTransfer. (2026, October 1). Configuring TLS for Secured SIP (Mediant Software SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-tls-for-sip

BibTeX

@misc{warmtransfer-audiocodes-sw-sbc-76-tls-for-sip,
  title  = {Configuring TLS for Secured SIP (Mediant Software SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-tls-for-sip},
  note   = {AudioCodes, accessed 2026-10-01}
}