Source note · Setting up a carrier SIP trunk on an AudioCodes SBC
By default the SBC initiates TLS only for the next network hop; the 'SIPS' check box (EnableSIPS) under SIP Definitions > Transport Settings is for multi-hop TLS.
Checked 2026-10-01
- Vendor
- AudioCodes
- Product
- Mediant Software SBC
- Subsystem
- TLS
- Deployment
- on-premises, cloud-hosted
- Region
- not restricted
- Release range
- 7.6
- Checked
- 2026-10-01
Sources
- Configuring TLS for Secured SIP (Mediant Software SBC User's Manual Version 7.6) — AudioCodes · tier 2 current vendor documentation · Configuring TLS for Secured SIP, SIPS step
Cite this note
APA
WarmTransfer. (2026, October 1). Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-tls-sips-next-hop. WarmTransfer. https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-tls-sips-next-hop
BibTeX
@misc{warmtransfer-claim-audiocodes-carrier-sip-trunk-setup-tls-sips-next-hop,
title = {Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-tls-sips-next-hop},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-tls-sips-next-hop},
note = {Source note audiocodes-carrier-sip-trunk-setup-tls-sips-next-hop, checked 2026-10-01}
}