Configuring Test Call Endpoints (Mediant Software SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring%20Test%20Call%20Endpoints.htm

Published

2026-10-01

Updated

unknown

Accessed

2026-10-01

HTTP status

200

License

AudioCodes copyright; no-redistribution; short excerpts and locators only

Source notes citing this source

• By default up to five test call rules can be configured; a License Key raises the number. in context
• Test Call rules are configured under Troubleshoot menu > Troubleshoot tab > Test Call folder > Test Call Rules. in context
• A test call rule's 'Route By' is IP Group (default) or Destination Address, its 'Call Party' is Caller (outgoing) or Called (incoming), and 'Called URI' sets the Request-URI user of the outgoing INVITE. in context
• The Test Call feature simulates a phone on the SBC that sets up SIP calls with a remote endpoint to test signaling and media, and can play DTMF digits or tones. in context

Cite this source record

APA

WarmTransfer. (2026, October 1). Configuring Test Call Endpoints (Mediant Software SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-test-call-endpoints

BibTeX

@misc{warmtransfer-audiocodes-sw-sbc-76-test-call-endpoints,
  title  = {Configuring Test Call Endpoints (Mediant Software SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-test-call-endpoints},
  note   = {AudioCodes, accessed 2026-10-01}
}