Source note · Setting up a carrier SIP trunk on an AudioCodes SBC

A test call rule's 'Route By' is IP Group (default) or Destination Address, its 'Call Party' is Caller (outgoing) or Called (incoming), and 'Called URI' sets the Request-URI user of the outgoing INVITE.

Checked 2026-10-01

Vendor: AudioCodes
Product: Mediant Software SBC
Subsystem: Test Call
Deployment: on-premises, cloud-hosted
Region: not restricted
Release range: 7.6
Checked: 2026-10-01

Sources

Configuring Test Call Endpoints (Mediant Software SBC User's Manual Version 7.6) — AudioCodes · tier 2 current vendor documentation · Configuring Test Call Endpoints, 'Route By', 'Call Party' and 'Called URI' parameters

Cite this note

APA

WarmTransfer. (2026, October 1). Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-testcall-route-by. WarmTransfer. https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-testcall-route-by

BibTeX

@misc{warmtransfer-claim-audiocodes-carrier-sip-trunk-setup-testcall-route-by,
  title  = {Setting up a carrier SIP trunk on an AudioCodes SBC: source note audiocodes-carrier-sip-trunk-setup-testcall-route-by},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/claims/audiocodes-carrier-sip-trunk-setup-testcall-route-by},
  note   = {Source note audiocodes-carrier-sip-trunk-setup-testcall-route-by, checked 2026-10-01}
}

Read in context