Source note · Troubleshooting DECT handsets on Webex Calling
A repeater with a red LED that fails registration is not in registration mode; reset it by unplugging for 30 seconds or holding its reset button for 5 seconds.
Checked 2026-10-02
The repeater is not in registration mode.
- Vendor
- Cisco
- Product
- Cisco IP DECT 6800 Series
- Subsystem
- DECT repeater
- Deployment
- multi-tenant, on-premises
- Region
- not restricted
- Release range
- current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Cisco IP DECT 6800 Series Administration Guide - Troubleshooting — Cisco Systems · tier 2 current vendor documentation · Repeater Installation Problems > Can't Set Up a Repeater - LED is Red
Cite this note
APA
WarmTransfer. (2026, October 2). Troubleshooting DECT handsets on Webex Calling: source note webex-calling-dect-troubleshooting-repeater-led-red. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-dect-troubleshooting-repeater-led-red
BibTeX
@misc{warmtransfer-claim-webex-calling-dect-troubleshooting-repeater-led-red,
title = {Troubleshooting DECT handsets on Webex Calling: source note webex-calling-dect-troubleshooting-repeater-led-red},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-dect-troubleshooting-repeater-led-red},
note = {Source note webex-calling-dect-troubleshooting-repeater-led-red, checked 2026-10-02}
}