Source note · Troubleshooting DECT handsets on Webex Calling
From firmware release 4.8, a multicell system can be configured automatically without a primary base station.
Checked 2026-10-02
In Firmware Release 4.8, you can configure a multicell system automatically without a primary base station
- Vendor
- Cisco
- Product
- Cisco IP DECT 6800 Series
- Subsystem
- DECT multi-cell sync
- Deployment
- multi-tenant, on-premises
- Region
- not restricted
- Release range
- firmware 4.8 and later
- Checked
- 2026-10-02
Sources
- Cisco IP DECT 6800 Series Administration Guide - Phone Administration — Cisco Systems · tier 2 current vendor documentation · Multicell setup section
Cite this note
APA
WarmTransfer. (2026, October 2). Troubleshooting DECT handsets on Webex Calling: source note webex-calling-dect-troubleshooting-fw48-auto-multicell. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-dect-troubleshooting-fw48-auto-multicell
BibTeX
@misc{warmtransfer-claim-webex-calling-dect-troubleshooting-fw48-auto-multicell,
title = {Troubleshooting DECT handsets on Webex Calling: source note webex-calling-dect-troubleshooting-fw48-auto-multicell},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-dect-troubleshooting-fw48-auto-multicell},
note = {Source note webex-calling-dect-troubleshooting-fw48-auto-multicell, checked 2026-10-02}
}