Source note · Setting up outgoing calling permissions in Webex Calling
Auto-transfer numbers should be configured before a call type or digit pattern is set to Auto-transfer, because that action sends calls to the configured number 1, 2 or 3.
inferred · Checked 2026-09-30
- Vendor
- Cisco
- Product
- Webex Calling
- Subsystem
- auto-transfer numbers
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Status
- inferred
- Checked
- 2026-09-30
Sources
- Outgoing call permissions for Webex Calling locations — Cisco Webex Help Center · tier 2 current vendor documentation · sections 'Permissions by call type' and 'Auto-transfer number'
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up outgoing calling permissions in Webex Calling: source note webex-calling-calling-permissions-setup-xfer-first. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-calling-permissions-setup-xfer-first
BibTeX
@misc{warmtransfer-claim-webex-calling-calling-permissions-setup-xfer-first,
title = {Setting up outgoing calling permissions in Webex Calling: source note webex-calling-calling-permissions-setup-xfer-first},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-calling-permissions-setup-xfer-first},
note = {Source note webex-calling-calling-permissions-setup-xfer-first, checked 2026-09-30}
}