Source note · Setting up analog devices and ATAs on Webex Calling
A fax machine must be connected directly to the ATA 192 phone port, without an extension or splitter, and should use overseas mode if available or otherwise a low transmission speed.
Checked 2026-09-30
use overseas mode, if available; if not, set the fax machine transmission speed to low
- Vendor
- Cisco
- Product
- Cisco ATA 192 Multiplatform
- Subsystem
- fax
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Get started with your Cisco ATA 191 and 192 — Cisco (Webex Help Center) · tier 2 current vendor documentation · section 'Devices associated with your ATA', fax machine item, and installation step 2
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-fax-direct-connect-192. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-fax-direct-connect-192
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-fax-direct-connect-192,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-fax-direct-connect-192},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-fax-direct-connect-192},
note = {Source note webex-calling-analog-ata-setup-fax-direct-connect-192, checked 2026-09-30}
}