Source note · Setting up analog devices and ATAs on Webex Calling
On an ATA 192, web access from the NETWORK (WAN) side is disabled by default; it is enabled by connecting to the ETHERNET port, browsing to 192.168.15.1 and turning on Remote Management under Administration > Remote Access.
Checked 2026-09-30
- Vendor
- Cisco
- Product
- Cisco ATA 192 Multiplatform
- Subsystem
- onboarding
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Get started with your Cisco ATA 191 and 192 — Cisco (Webex Help Center) · tier 2 current vendor documentation · section 'Enable WAN port on ATA 192'
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata192-remote-mgmt. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata192-remote-mgmt
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-ata192-remote-mgmt,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata192-remote-mgmt},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata192-remote-mgmt},
note = {Source note webex-calling-analog-ata-setup-ata192-remote-mgmt, checked 2026-09-30}
}