Source note · Setting up analog devices and ATAs on Webex Calling
ATA 191 devices onboard automatically through EDOS when their MAC address is provisioned in Control Hub, and the automatic onboarding runs after the first factory boot or after each factory reset.
Checked 2026-09-30
Your Cisco 191/192 ATA devices use EDOS to automatically onboard if they are provisioned with a MAC address in the Control Hub.
- Vendor
- Cisco
- Product
- Cisco ATA 191 Multiplatform
- Subsystem
- onboarding
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Get started with your Cisco ATA 191 and 192 — Cisco (Webex Help Center) · tier 2 current vendor documentation · EDOS automatic onboarding passage
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata-edos-onboard-191. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata-edos-onboard-191
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-ata-edos-onboard-191,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata-edos-onboard-191},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata-edos-onboard-191},
note = {Source note webex-calling-analog-ata-setup-ata-edos-onboard-191, checked 2026-09-30}
}