Source note · Setting up analog devices and ATAs on Webex Calling
An ATA's ports are configured in Control Hub at Management > Users > the user > Devices > the device > Users on this Device > Configure Ports, where a shared port configuration is added by searching for a name or phone number; only workspaces without devices appear in that lookup.
Checked 2026-09-30
Only workspaces without devices appear in the lookup.
- Vendor
- Cisco
- Product
- Webex Calling
- Subsystem
- Control Hub devices
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Configure and manage Webex Calling devices — Cisco Webex · tier 2 current vendor documentation · section 'Configure an ATA device for a user'
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata-configure-ports. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata-configure-ports
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-ata-configure-ports,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata-configure-ports},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata-configure-ports},
note = {Source note webex-calling-analog-ata-setup-ata-configure-ports, checked 2026-09-30}
}