Consult transfer and blind transfer require no separate configuration on Unified CM: the same Transfer control produces both and the difference is only whether the transferring party presses it the second time before or after the target answers.
Checked 2026-09-15
The difference between the two types of transfer depends on when the transferring party presses the Transfer button a second time.
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- Call transfer service parameters
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 11.0(1)
- Checked
- 2026-09-15
Sources
- Feature Configuration Guide for Cisco Unified Communications Manager Release 11.0(1), complete book, Internet Archive capture — Cisco Systems, Inc., served by the Internet Archive · tier 2 current vendor documentation · Feature Configuration Guide 11.0(1), Call Transfer Overview, page 495
Cite this note
APA
WarmTransfer. (2026, September 15). Unified CM service parameters that change transfer behaviour: source note cucmsp-consult-and-blind-need-no-configuration. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucmsp-consult-and-blind-need-no-configuration
BibTeX
@misc{warmtransfer-claim-cucmsp-consult-and-blind-need-no-configuration,
title = {Unified CM service parameters that change transfer behaviour: source note cucmsp-consult-and-blind-need-no-configuration},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucmsp-consult-and-blind-need-no-configuration},
note = {Source note cucmsp-consult-and-blind-need-no-configuration, checked 2026-09-15}
}