Source note · Connecting Unified CM to RingCentral contact center
RingCentral's RingCX number documentation describes numbers bought or ported through RingEX and made CCRNs, and no RingCentral page found describes a SIP trunk from a third-party PBX such as Unified CM into RingCX, so Unified CM reaches RingCX by dialing a CCRN over the PSTN.
inferred · Checked 2026-09-25
- Vendor
- RingCentral
- Product
- RingCX
- Subsystem
- number routing
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-25
- Status
- inferred
- Checked
- 2026-09-25
Sources
- Configuring a voice channel in RingCX — RingCentral · tier 2 current vendor documentation · prerequisites before configuration steps
Cite this note
APA
WarmTransfer. (2026, September 25). Connecting Unified CM to RingCentral contact center: source note cucm-with-ringcentral-contact-center-no-pbx-trunk-doc. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-with-ringcentral-contact-center-no-pbx-trunk-doc
BibTeX
@misc{warmtransfer-claim-cucm-with-ringcentral-contact-center-no-pbx-trunk-doc,
title = {Connecting Unified CM to RingCentral contact center: source note cucm-with-ringcentral-contact-center-no-pbx-trunk-doc},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-with-ringcentral-contact-center-no-pbx-trunk-doc},
note = {Source note cucm-with-ringcentral-contact-center-no-pbx-trunk-doc, checked 2026-09-25}
}