Source note · Cisco IP phone firmware management
Cisco notes that a new load can be applied to a single device before it is configured as the system-wide default.
Checked 2026-09-25
You can apply a new load to a single device before configuring it as a systemwide default.
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- device firmware management
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15 and SUs
- Checked
- 2026-09-25
Sources
- Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Manage Device Firmware — Cisco Systems · tier 2 current vendor documentation · Manage Device Firmware > Device Firmware Updates Overview, Tip
Cite this note
APA
WarmTransfer. (2026, September 25). Cisco IP phone firmware management: source note cucm-phone-firmware-pilot-single-device. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-phone-firmware-pilot-single-device
BibTeX
@misc{warmtransfer-claim-cucm-phone-firmware-pilot-single-device,
title = {Cisco IP phone firmware management: source note cucm-phone-firmware-pilot-single-device},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-phone-firmware-pilot-single-device},
note = {Source note cucm-phone-firmware-pilot-single-device, checked 2026-09-25}
}