Under Timer Control, setting the Wait (delay before ringing) value to zero makes the remote destination ring immediately.
Checked 2026-10-02
In case the Remote Destination is required to ring immediately, you can set the Wait as zero.
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- Cisco Unified Mobility
- Deployment
- on-premises
- Region
- not restricted
- Release range
- tested on 11.0; current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Configure Single Number Reach for CallManager — Cisco Systems · tier 2 current vendor documentation · Configure, Remote Destination Configuration
Cite this note
APA
WarmTransfer. (2026, October 2). Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-wait-zero-rings-now. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-wait-zero-rings-now
BibTeX
@misc{warmtransfer-claim-cucm-mobile-connect-setup-wait-zero-rings-now,
title = {Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-wait-zero-rings-now},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-wait-zero-rings-now},
note = {Source note cucm-mobile-connect-setup-wait-zero-rings-now, checked 2026-10-02}
}