Source note · Unified CM network-based and built-in bridge recording
The Record feature can go on a phone button template (Line dropdown) or a softkey template (Connected call state), and phones must be reset or have the configuration applied afterwards.
Checked 2026-09-25
- Vendor
- Cisco
- Product
- Unified Communications Manager
- Subsystem
- phone templates
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 15 and SUs; current as of 2026-09-25
- Checked
- 2026-09-25
Sources
- Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Recording — Cisco Systems · tier 2 current vendor documentation · Recording Configuration Task Flow > Configure Record Feature Button / Configure Recording Softkey
Cite this note
APA
WarmTransfer. (2026, September 25). Unified CM network-based and built-in bridge recording: source note cucm-built-in-bridge-recording-record-button-softkey. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-built-in-bridge-recording-record-button-softkey
BibTeX
@misc{warmtransfer-claim-cucm-built-in-bridge-recording-record-button-softkey,
title = {Unified CM network-based and built-in bridge recording: source note cucm-built-in-bridge-recording-record-button-softkey},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-built-in-bridge-recording-record-button-softkey},
note = {Source note cucm-built-in-bridge-recording-record-button-softkey, checked 2026-09-25}
}