Source note · Cisco Emergency Responder setup

For switch-port tracking, Emergency Responder talks to switches over SNMPv2 or SNMPv3; for SNMPv2 the administrator enters the switches' read community string under Phone Tracking > SNMP Settings.

Checked 2026-09-24

The SNMP read community string is a password shared between Emergency Responder and the switches.

Vendor: Cisco
Product: Cisco Emergency Responder
Subsystem: switch-port tracking
Deployment: on-premises
Region: not restricted
Release range: Emergency Responder 15 and SUs
Checked: 2026-09-24

Sources

Cisco Emergency Responder Administration Guide, Release 15 and SUs - Configure Cisco Emergency Responder — Cisco Systems · tier 2 current vendor documentation · Configure Cisco Emergency Responder > Emergency Responder Switch Configuration > Set Up SNMPv2 / Set Up SNMPv3

Cite this note

APA

WarmTransfer. (2026, September 24). Cisco Emergency Responder setup: source note cisco-emergency-responder-setup-snmp-switches. WarmTransfer. https://warmtransfer.net/knowledge/claims/cisco-emergency-responder-setup-snmp-switches

BibTeX

@misc{warmtransfer-claim-cisco-emergency-responder-setup-snmp-switches,
  title  = {Cisco Emergency Responder setup: source note cisco-emergency-responder-setup-snmp-switches},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/claims/cisco-emergency-responder-setup-snmp-switches},
  note   = {Source note cisco-emergency-responder-setup-snmp-switches, checked 2026-09-24}
}

Read in context