PBX GUI - Outbound Routes Module User Guide

Publisher

Sangoma

URL

https://sangomakb.atlassian.net/wiki/spaces/PG/pages/26181933

Published

2026-02-25

Updated

unknown

Accessed

2026-09-25

HTTP status

200

License

Sangoma documentation; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• An outbound route dial pattern has four elements: Prepend (added on a match), Prefix (stripped on a match), Match Pattern, and an optional CallerID the call must carry. in context
• An outbound route is the set of rules the PBX uses to choose the trunk for an outbound call. in context
• In FreePBX dial patterns, X matches 0-9, Z matches 1-9, N matches 2-9, [ ] matches any digit listed, and . matches one or more characters. in context
• Routes are checked from highest to lowest priority, only the first matching route is used, and the call fails if no route matches. in context
• Marking an outbound route's Route Type as Emergency makes it use the device's Emergency CID setting, if one is set. in context
• An outbound route's Trunk Sequence for Matched Routes sets the order in which trunks are tried for a matched call. in context

Cite this source record

APA

WarmTransfer. (2026, February 25). PBX GUI - Outbound Routes Module User Guide. WarmTransfer. https://warmtransfer.net/knowledge/sources/sangoma-pbxgui-outbound-routes-user-guide

BibTeX

@misc{warmtransfer-sangoma-pbxgui-outbound-routes-user-guide,
  title  = {PBX GUI - Outbound Routes Module User Guide},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/sangoma-pbxgui-outbound-routes-user-guide},
  note   = {Sangoma, accessed 2026-09-25}
}