Configure media bypass with Direct Routing

Publisher

Microsoft

URL

https://learn.microsoft.com/en-us/microsoftteams/direct-routing-configure-media-bypass

Published

2026-09-10

Updated

unknown

Accessed

2026-09-24

HTTP status

200

License

Microsoft Learn terms of use; no-redistribution; short excerpts and locators only

Source notes citing this source

• Turning bypass on for an existing trunk switches all production users at the same time, and initial trunk or port issues may then affect production users, which is why Microsoft recommends the phased approach. in context
• When two trunks share one SBC for a phased bypass migration, the certificate must support both trunks, either with both FQDNs in the SAN or with a wildcard certificate. in context
• Turning on media bypass requires that the SBC vendor supports media bypass and provides SBC-side instructions, that bypass is turned on for the trunk, and that the required ports are opened. in context

Cite this source record

APA

WarmTransfer. (2026, September 10). Configure media bypass with Direct Routing. WarmTransfer. https://warmtransfer.net/knowledge/sources/ms-learn-dr-configure-media-bypass

BibTeX

@misc{warmtransfer-ms-learn-dr-configure-media-bypass,
  title  = {Configure media bypass with Direct Routing},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/ms-learn-dr-configure-media-bypass},
  note   = {Microsoft, accessed 2026-09-24}
}