Cisco IP Desk Phone with Multiplatform Firmware (MPP) - Administration Guide - Technical Details

Publisher

Cisco Systems

URL

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/MPP/common/ag_desk_mpp_6800_7800_8800/tpcc_b_cisco-ip-desk-phone-multiplatform/tpcc_m_technical-details_deskphone-1201.html

Published

2025-11-19

Updated

unknown

Accessed

2026-09-24

HTTP status

200

License

Cisco copyright; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• On Cisco MPP desk phones with both CDP and LLDP-MED enabled, the VLAN network policy is whichever policy was set or changed most recently by either protocol. in context
• On Cisco MPP desk phones, if neither CDP nor LLDP-MED supplies a VLAN, the manually configured VLAN ID is used, and without a manual VLAN the default network policy applies. in context
• In the LLDP System Capabilities TLV, a Cisco MPP phone with a PC port sets Bit 2 (Bridge) and Bit 5 (Phone), while a phone without a PC port sets only Bit 5. in context

Cite this source record

APA

WarmTransfer. (2025, November 19). Cisco IP Desk Phone with Multiplatform Firmware (MPP) - Administration Guide - Technical Details. WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-mpp-desk-ag-technical-details

BibTeX

@misc{warmtransfer-cisco-mpp-desk-ag-technical-details,
  title  = {Cisco IP Desk Phone with Multiplatform Firmware (MPP) - Administration Guide - Technical Details},
  author = {{WarmTransfer}},
  year   = {2025},
  url    = {https://warmtransfer.net/knowledge/sources/cisco-mpp-desk-ag-technical-details},
  note   = {Cisco Systems, accessed 2026-09-24}
}