Add a Desk Phone or Analog Telephone Adapter to a User

Publisher

Cisco (Webex Help Center)

URL

https://help.webex.com/en-us/article/9wqlsbb/Add-a-Desk-Phone-or-Analog-Telephone-Adapter-to-a-User

Published

2025-11-13

Updated

unknown

Accessed

2026-09-30

HTTP status

200

License

Cisco proprietary; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• An ATA is added to a user in Control Hub from Devices by starting a new device, choosing Existing User, selecting the user, selecting the device type and supplying the MAC address where required. in context
• When adding an ATA, all network settings such as VLAN, IP address and subnet mask must be configured before the device is activated, because they cannot be accessed or changed after activation. in context
• When an ATA with more than one port is added, each port is treated as a separate device in Control Hub. in context

Cite this source record

APA

WarmTransfer. (2025, November 13). Add a Desk Phone or Analog Telephone Adapter to a User. WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-help-9wqlsbb-add-phone-ata-to-user

BibTeX

@misc{warmtransfer-cisco-help-9wqlsbb-add-phone-ata-to-user,
  title  = {Add a Desk Phone or Analog Telephone Adapter to a User},
  author = {{WarmTransfer}},
  year   = {2025},
  url    = {https://warmtransfer.net/knowledge/sources/cisco-help-9wqlsbb-add-phone-ata-to-user},
  note   = {Cisco (Webex Help Center), accessed 2026-09-30}
}