Cisco IOS Debug Command Reference - Commands S through Z - debug voip avlist through debug vpm signaling

Publisher

Cisco Systems

URL

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/debug/command/s1/db-s1-cr-book/db-v1.html

Published

2017-07-10

Updated

unknown

Accessed

2026-10-02

HTTP status

200

License

Cisco website terms of use; no-redistribution; short excerpts and locators only

Source notes citing this source

• In debug voip ccapi inout output, the selected inbound dial peer appears as 'Incoming Dial-peer=<tag>' and the selected outbound dial peer as 'Outgoing Dial-peer=<tag>'. in context
• Cisco recommends logging debug voip ccapi inout output to a buffer rather than the console because the output volume can severely affect gateway performance. in context
• debug voip dialpeer shows dial-peer manager results such as 'Result=Success(0); Incoming Dial-peer=1 Is Matched', and Cisco advises buffered logging because it generates a large volume of messages. in context

Cite this source record

APA

WarmTransfer. (2017, July 10). Cisco IOS Debug Command Reference - Commands S through Z - debug voip avlist through debug vpm signaling. WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-debug-cr-voip-ccapi-dialpeer

BibTeX

@misc{warmtransfer-cisco-debug-cr-voip-ccapi-dialpeer,
  title  = {Cisco IOS Debug Command Reference - Commands S through Z - debug voip avlist through debug vpm signaling},
  author = {{WarmTransfer}},
  year   = {2017},
  url    = {https://warmtransfer.net/knowledge/sources/cisco-debug-cr-voip-ccapi-dialpeer},
  note   = {Cisco Systems, accessed 2026-10-02}
}