Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Alarms

Publisher

Cisco Systems

URL

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/15/adminGd/cucm_b_administration-guide-15/cucm_b_test-adminguide_chapter_010011.html

Published

2026-08-31

Updated

unknown

Accessed

2026-09-25

HTTP status

200

License

Cisco copyrighted documentation; no-redistribution; short excerpts and locators only

Source notes citing this source

• Alarm destinations and levels are set at Cisco Unified Serviceability > Alarm > Configuration; alarm definitions are at Alarm > Definitions. in context
• Alarm event levels run from Emergency to Debug, and the default alarm event level is Error. in context
• Unified CM Serviceability alarms can be sent to Local Syslog (viewed in RTMT SysLog Viewer), Remote Syslog, SDL trace (CallManager and CTIManager only) and SDI trace. in context
• A Unified CM node must not be configured as a remote syslog server because it does not accept syslog messages from another server. in context
• Up to five remote syslog servers (Server Name 1-5) can be configured as alarm destinations. in context
• The Cisco Syslog Agent enterprise parameters (Remote Syslog Server Name 1-5 and Syslog Severity) forward alarms at or above the set severity to remote syslog servers. in context

Cite this source record

APA

WarmTransfer. (2026, August 31). Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Alarms. WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-cucm-admin-15-alarms

BibTeX

@misc{warmtransfer-cisco-cucm-admin-15-alarms,
  title  = {Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Alarms},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/cisco-cucm-admin-15-alarms},
  note   = {Cisco Systems, accessed 2026-09-25}
}