Source record · tier 2 current vendor documentation
Interface and Hardware Components Configuration Guide, Cisco IOS XE Cupertino 17.7.x (Catalyst 9300 Switches) - Configuring LLDP, LLDP-MED, and Wired Location Service
- Publisher
- Cisco Systems
- URL
- https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-7/configuration_guide/int_hw/b_177_int_and_hw_9300_cg/configuring_lldp__lldp_med__and_wired_location_service.html
- Published
- 2021-12-07
- Updated
- unknown
- Accessed
- 2026-10-02
- HTTP status
- 200
- License
- Cisco documentation; all rights reserved; no-redistribution; short excerpts and locators only
Source notes citing this source
- In the Catalyst 9300 IOS XE 17.7.x guide, LLDP is globally disabled by default and is enabled with 'lldp run'. in context
- By default a Catalyst 9300 sends only plain LLDP until it receives LLDP-MED packets from the end device. Only then does it send LLDP with MED TLVs, such as network policy. in context
- Cisco's Catalyst 9300 LLDP guide says LLDP must be disabled on interfaces where CDP is used for power negotiation. in context
- On Catalyst 9300, if an LLDP-MED network-policy profile is configured on an interface first, 'switchport voice vlan' cannot be applied to that interface afterwards. If the voice VLAN is configured first, a network-policy profile can still be added. in context
Cite this source record
APA
WarmTransfer. (2021, December 7). Interface and Hardware Components Configuration Guide, Cisco IOS XE Cupertino 17.7.x (Catalyst 9300 Switches) - Configuring LLDP, LLDP-MED, and Wired Location Service. WarmTransfer. https://warmtransfer.net/knowledge/sources/cisco-cat9300-177-lldp-med
BibTeX
@misc{warmtransfer-cisco-cat9300-177-lldp-med,
title = {Interface and Hardware Components Configuration Guide, Cisco IOS XE Cupertino 17.7.x (Catalyst 9300 Switches) - Configuring LLDP, LLDP-MED, and Wired Location Service},
author = {{WarmTransfer}},
year = {2021},
url = {https://warmtransfer.net/knowledge/sources/cisco-cat9300-177-lldp-med},
note = {Cisco Systems, accessed 2026-10-02}
}