Configuring Coders Groups (Mediant Software SBC User's Manual Ver. 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring%20Coder%20Groups.htm

Published

unknown

Updated

unknown

Accessed

2026-09-30

HTTP status

200

License

AudioCodes copyright; no-redistribution; short excerpts and locators only

Source notes citing this source

• The first coder listed in a Coders Group has the highest priority and is used whenever possible. in context
• Up to 21 Coders Groups can be configured, each with up to 10 coders, and each coder entry has a packetization time, rate, payload type and silence suppression setting. in context
• Coders Groups, which determine the audio coders used for calls, are configured under Setup menu > Signaling & Media tab > Coders & Profiles folder > Coders Groups. in context
• Coders Groups take effect on SBC calls through IP Profiles, using the IP Profile's Extension Coders Group parameter together with its Allowed Coders Mode setting. in context
• Mediant Coders Groups determine the audio coders used for calls, are assigned through IP Profiles, list coders in priority order (first is preferred), and let the device add a coder the other side needs to the SDP offer so it can transcode. in context

Cite this source record

APA

WarmTransfer. (2026, September 30). Configuring Coders Groups (Mediant Software SBC User's Manual Ver. 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-um76-coders-groups

BibTeX

@misc{warmtransfer-audiocodes-um76-coders-groups,
  title  = {Configuring Coders Groups (Mediant Software SBC User's Manual Ver. 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-um76-coders-groups},
  note   = {AudioCodes, accessed 2026-09-30}
}