Configuring SIP Interfaces (Mediant Software SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring%20SIP%20Interfaces.htm

Published

unknown

Updated

unknown

Accessed

2026-09-24

HTTP status

200

License

AudioCodes copyright; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• The SIP Interface 'Classification Failure Response Type' sets the SIP response sent when classification fails; the default is 500, valid values are 400 to 699, and 0 sends no response, which helps against DoS. in context
• A SIP Interface represents a Layer-3 network by defining a local listening port and transport type and assigning an IP network interface for SIP signaling. in context
• Each SIP Interface can be associated with only one SRD; in single-SRD deployments SIP Interfaces go to the default SRD automatically. in context

Cite this source record

APA

WarmTransfer. (2026, September 24). Configuring SIP Interfaces (Mediant Software SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-swsbc-um76-sip-interfaces

BibTeX

@misc{warmtransfer-audiocodes-swsbc-um76-sip-interfaces,
  title  = {Configuring SIP Interfaces (Mediant Software SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-swsbc-um76-sip-interfaces},
  note   = {AudioCodes, accessed 2026-09-24}
}