Configuring Proxy Sets (Mediant Software SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring%20Proxy%20Sets.htm

Published

unknown

Updated

unknown

Accessed

2026-09-24

HTTP status

200

License

AudioCodes copyright; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• The Mediant default Proxy Keep-Alive Time of 60 seconds sits exactly at Microsoft's upper bound of one OPTIONS every 60 seconds, so the default appears compliant, but any lower setting would exceed the limit. inferred in context
• A Mediant Proxy Set defines the address (IP address or FQDN) and transport type (for example UDP or TCP) of a SIP server such as a proxy or registrar. in context
• The Proxy Set 'Success Detection Retries' parameter (range 1 to 100, default 1) sets how many consecutive successful keep-alives are needed before an offline proxy is treated as online again. in context
• Proxy Set FQDNs can be resolved by A-record (the default), SRV, NAPTR or a Microsoft Skype for Business method. in context
• The Proxy Set 'Proxy Keep-Alive Time' defaults to 60 seconds and can be set from 5 to 2,000,000 seconds. in context
• Proxy Set keep-alive can use SIP OPTIONS, REGISTER, OPTIONS sent only to the active server, or a 'fake REGISTER' that expects a 404 response. in context
• Proxy Set load balancing is disabled by default and can be set to Round Robin or Random Weights (traffic distributed by each proxy's configured weight). in context
• A Proxy Set can hold up to 10 addresses on Mediant VE/CE with 2 to 16 GB RAM, and up to 50 on Mediant SE and on VE/CE with 32 to 64 GB. in context
• In Parking redundancy mode the SBC stays with the current proxy until it fails; in Homing mode it always tries to use the highest-priority proxy currently online. in context
• At least one SIP Interface must be assigned to a Proxy Set. in context

Cite this source record

APA

WarmTransfer. (2026, September 24). Configuring Proxy Sets (Mediant Software SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-swsbc-um76-proxy-sets

BibTeX

@misc{warmtransfer-audiocodes-swsbc-um76-proxy-sets,
  title  = {Configuring Proxy Sets (Mediant Software SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-swsbc-um76-proxy-sets},
  note   = {AudioCodes, accessed 2026-09-24}
}