Configuring SIP Message Manipulation (Mediant Software SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring%20SIP%20Message%20Manipulation.htm

Published

unknown

Updated

unknown

Accessed

2026-09-24

HTTP status

200

License

AudioCodes copyright; all rights reserved; no-redistribution; short excerpts and locators only

Source notes citing this source

• Message Manipulation rules can add, remove or modify SIP headers, header parameters and message bodies, translate response codes, and support topology hiding; several rules can apply to the same message in sequence. in context
• The Mediant Software SBC allows 750 Message Manipulation rules in total on 2 to 8 GB VE/CE, 1,000 on 16 GB VE/CE, and 5,000 on Mediant SE and 32 to 64 GB VE/CE. in context
• A Message Manipulation rule's Row Role is either 'Use Current Condition' (evaluate its own condition) or 'Use Previous Condition' (reuse the condition of the nearest earlier rule set to Use Current Condition). in context
• The syntax for Message Manipulation conditions and actions is documented in a separate AudioCodes SIP Message Manipulation Reference Guide, not in the User's Manual. in context
• Message manipulation assigned through IP Groups is post-classification and runs only after classification, number manipulation and routing. in context
• Message manipulation can run before classification by assigning a Manipulation Set to the SIP Interface; it applies only to incoming dialog-initiating requests, not in-dialog messages. in context

Cite this source record

APA

WarmTransfer. (2026, September 24). Configuring SIP Message Manipulation (Mediant Software SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-swsbc-um76-message-manipulation

BibTeX

@misc{warmtransfer-audiocodes-swsbc-um76-message-manipulation,
  title  = {Configuring SIP Message Manipulation (Mediant Software SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-swsbc-um76-message-manipulation},
  note   = {AudioCodes, accessed 2026-09-24}
}