Configuring IP-to-IP Outbound Manipulations (Mediant Software SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring-IP-to-IP-Outbound-Manipulation.htm

Published

2026-10-01

Updated

unknown

Accessed

2026-10-01

HTTP status

200

License

AudioCodes copyright; no-redistribution; short excerpts and locators only

Source notes citing this source

• Outbound Manipulation actions are Remove From Left, Remove From Right, Leave From Right, Prefix to Add, Suffix to Add and Privacy Restriction Mode, applied to the chosen Manipulated Item (Source URI, Destination URI or Calling Name). in context
• Outbound manipulations are applied only after the routing process, so routing rules match the number as it was before outbound manipulation. in context
• The SBC applies the first matching Outbound Manipulation rule, so stricter rules belong higher in the table. in context
• Outbound number manipulation rules are configured under Setup menu > Signaling & Media tab > SBC folder > Manipulation > Outbound Manipulations, and up to 3,000 rules can be configured. in context
• An Outbound Manipulation rule changes the source or destination Request-URI user part, or the calling name, of outbound SIP dialog requests. in context

Cite this source record

APA

WarmTransfer. (2026, October 1). Configuring IP-to-IP Outbound Manipulations (Mediant Software SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-outbound-manipulation

BibTeX

@misc{warmtransfer-audiocodes-sw-sbc-76-outbound-manipulation,
  title  = {Configuring IP-to-IP Outbound Manipulations (Mediant Software SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-outbound-manipulation},
  note   = {AudioCodes, accessed 2026-10-01}
}