Configuring Media Realms (Mediant Software SBC User's Manual Version 7.6)

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-760/Content/UM/Configuring%20Media%20Realms.htm

Published

2026-10-01

Updated

unknown

Accessed

2026-10-01

HTTP status

200

License

AudioCodes copyright; no-redistribution; short excerpts and locators only

Source notes citing this source

• Media Realms are configured under Setup menu > Signaling & Media tab > Core Entities folder > Media Realms, with an IPv4 Interface Name, a UDP Port Range Start and a Number of Media Session Legs. in context
• Media Realms associated with the same IP interface must not have overlapping port ranges, and their ranges must not conflict with SIP signaling ports on that interface. in context
• A Media Realm's UDP Port Range End is read-only and is calculated from the start port plus the number of session legs times the port spacing, minus one. in context
• Only one Media Realm can be marked as the Default Media Realm, which is used where no Media Realm is explicitly assigned. in context

Cite this source record

APA

WarmTransfer. (2026, October 1). Configuring Media Realms (Mediant Software SBC User's Manual Version 7.6). WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-media-realms

BibTeX

@misc{warmtransfer-audiocodes-sw-sbc-76-media-realms,
  title  = {Configuring Media Realms (Mediant Software SBC User's Manual Version 7.6)},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-sw-sbc-76-media-realms},
  note   = {AudioCodes, accessed 2026-10-01}
}