Configuring Proxy Sets - Mediant Software SBC User's Manual Version 7.4

Publisher

AudioCodes

URL

https://techdocs.audiocodes.com/session-border-controller-sbc/mediant-software-sbc/user-manual/version-740/content/um/Configuring%20Proxy%20Sets.htm

Published

unknown

Updated

unknown

Accessed

2026-09-25

HTTP status

200

License

AudioCodes website terms of use; no-redistribution; short excerpts and locators only

Source notes citing this source

• On AudioCodes Mediant SBC, the Proxy Set parameter Keep-Alive Failure Responses lists up to three SIP response codes that, if received in reply to keep-alive messages, make the device treat the proxy as offline. in context
• AudioCodes Proxy Hot Swap is disabled by default; when enabled, a response listed in the SBC Alternative Routing Reasons Set moves the request to the next proxy, and if no proxy is available the SIP message fails. in context
• AudioCodes Proxy Keep-Alive can use OPTIONS or REGISTER; Proxy Keep-Alive Time defaults to 60 seconds, and Success Detection Retries (default 1) with Success Detection Interval (default 10 seconds) set how many consecutive successes bring an offline proxy back online. in context

Cite this source record

APA

WarmTransfer. (2026, September 25). Configuring Proxy Sets - Mediant Software SBC User's Manual Version 7.4. WarmTransfer. https://warmtransfer.net/knowledge/sources/audiocodes-sbc-um-740-proxy-sets

BibTeX

@misc{warmtransfer-audiocodes-sbc-um-740-proxy-sets,
  title  = {Configuring Proxy Sets - Mediant Software SBC User's Manual Version 7.4},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/sources/audiocodes-sbc-um-740-proxy-sets},
  note   = {AudioCodes, accessed 2026-09-25}
}