Source note · Webex Calling Local Gateway IOS XE command reference
voice class uri 100 sip uses pattern dtg= followed by the Trunk OTG/DTG value from Control Hub to match incoming Webex INVITEs to the Webex trunk dial-peer.
Checked 2026-10-02
When entering this pattern, use dtg= followed by the Trunk OTG/DTG value provided in the Control Hub
- Vendor
- Cisco
- Product
- Webex Calling Local Gateway
- Subsystem
- dial-peer-matching
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Voice class uri 100 sip block and explanation
Cite this note
APA
WarmTransfer. (2026, October 2). Webex Calling Local Gateway IOS XE command reference: source note webex-lgw-ios-xe-command-reference-uri-dtg-pattern. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-lgw-ios-xe-command-reference-uri-dtg-pattern
BibTeX
@misc{warmtransfer-claim-webex-lgw-ios-xe-command-reference-uri-dtg-pattern,
title = {Webex Calling Local Gateway IOS XE command reference: source note webex-lgw-ios-xe-command-reference-uri-dtg-pattern},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-lgw-ios-xe-command-reference-uri-dtg-pattern},
note = {Source note webex-lgw-ios-xe-command-reference-uri-dtg-pattern, checked 2026-10-02}
}