Source note · Webex Calling Local Gateway IOS XE command reference
The network toward Webex Calling must use IPv4, and Local Gateway FQDN or SRV addresses configured in Control Hub must resolve to a public IPv4 address.
Checked 2026-10-02
The network toward Webex Calling must use an IPv4 address
- Vendor
- Cisco
- Product
- Webex Calling Local Gateway
- Subsystem
- network
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Prerequisites / certificate and network requirements
Cite this note
APA
WarmTransfer. (2026, October 2). Webex Calling Local Gateway IOS XE command reference: source note webex-lgw-ios-xe-command-reference-ipv4-only-webex-side. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-lgw-ios-xe-command-reference-ipv4-only-webex-side
BibTeX
@misc{warmtransfer-claim-webex-lgw-ios-xe-command-reference-ipv4-only-webex-side,
title = {Webex Calling Local Gateway IOS XE command reference: source note webex-lgw-ios-xe-command-reference-ipv4-only-webex-side},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-lgw-ios-xe-command-reference-ipv4-only-webex-side},
note = {Source note webex-lgw-ios-xe-command-reference-ipv4-only-webex-side, checked 2026-10-02}
}