Source note · Webex Calling Local Gateway IOS XE command reference
destination-pattern BAD.BAD on the Local Gateway dial-peers is a dummy pattern, required because outbound calls are routed via an inbound dial-peer's destination dial-peer group rather than by number matching.
Checked 2026-10-02
A dummy destination pattern is required when routing outbound calls using an inbound dial-peer group
- Vendor
- Cisco
- Product
- Webex Calling Local Gateway
- Subsystem
- call-routing
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Dial-peer 100, 200, 300 and 400 explanation lists: destination-pattern BAD.BAD
Cite this note
APA
WarmTransfer. (2026, October 2). Webex Calling Local Gateway IOS XE command reference: source note webex-lgw-ios-xe-command-reference-bad-bad-dummy-pattern. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-lgw-ios-xe-command-reference-bad-bad-dummy-pattern
BibTeX
@misc{warmtransfer-claim-webex-lgw-ios-xe-command-reference-bad-bad-dummy-pattern,
title = {Webex Calling Local Gateway IOS XE command reference: source note webex-lgw-ios-xe-command-reference-bad-bad-dummy-pattern},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-lgw-ios-xe-command-reference-bad-bad-dummy-pattern},
note = {Source note webex-lgw-ios-xe-command-reference-bad-bad-dummy-pattern, checked 2026-10-02}
}