Source note · Setting up third-party SIP phones on Webex Calling
After a customer-managed device is added, Control Hub displays the Line ID (a user part and a domain part), the SIP Username, the SIP Password and the Outbound Proxy address.
Checked 2026-09-30
- Vendor
- Cisco
- Product
- Webex Calling
- Subsystem
- SIP credentials
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Add your customer managed device — Cisco · tier 2 current vendor documentation · section 'Add customer-managed device to user', final step and field table
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up third-party SIP phones on Webex Calling: source note webex-calling-third-party-phone-setup-cm-fields-shown. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-third-party-phone-setup-cm-fields-shown
BibTeX
@misc{warmtransfer-claim-webex-calling-third-party-phone-setup-cm-fields-shown,
title = {Setting up third-party SIP phones on Webex Calling: source note webex-calling-third-party-phone-setup-cm-fields-shown},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-third-party-phone-setup-cm-fields-shown},
note = {Source note webex-calling-third-party-phone-setup-cm-fields-shown, checked 2026-09-30}
}