Source note · Setting up third-party SIP phones on Webex Calling
On an Algo device the SIP Domain is the part of the Webex Line ID after the @, the SIP Extension is the part before it, the Authentication ID is the Webex SIP Username, the Authentication Password is the Webex SIP Password, and the Outbound Proxy is the address shown in Control Hub.
Checked 2026-09-30
- Vendor
- Algo
- Product
- Algo SIP endpoints
- Subsystem
- SIP credentials
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- Algo firmware 3.4.4 or later
- Checked
- 2026-09-30
Sources
- Cisco Webex Registration Guide — Algo Communication Products Ltd. · tier 3 vendor-maintained repositories · Algo device configuration, Basic Settings SIP tab field table
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up third-party SIP phones on Webex Calling: source note webex-calling-third-party-phone-setup-algo-mapping. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-third-party-phone-setup-algo-mapping
BibTeX
@misc{warmtransfer-claim-webex-calling-third-party-phone-setup-algo-mapping,
title = {Setting up third-party SIP phones on Webex Calling: source note webex-calling-third-party-phone-setup-algo-mapping},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-third-party-phone-setup-algo-mapping},
note = {Source note webex-calling-third-party-phone-setup-algo-mapping, checked 2026-09-30}
}