Source note · Setting up a Webex Calling Local Gateway
When the Webex Calling trunk is created in Unified CM, its SIP Trunk Security Profile incoming port must be set to 5065.
Checked 2026-09-24
When creating the Webex Calling trunk in Unified CM, ensure that you configure the incoming port in the SIP Trunk Security Profile settings to 5065.
- Vendor
- Cisco
- Product
- Cisco Unified CM
- Subsystem
- Local Gateway with Unified CM
- Deployment
- on-premises
- Region
- not restricted
- Release range
- current as of 2026-09-24
- Checked
- 2026-09-24
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Configure Local Gateway with an existing Unified CM environment
Cite this note
APA
WarmTransfer. (2026, September 24). Setting up a Webex Calling Local Gateway: source note webex-calling-local-gateway-setup-ucm-security-profile. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-local-gateway-setup-ucm-security-profile
BibTeX
@misc{warmtransfer-claim-webex-calling-local-gateway-setup-ucm-security-profile,
title = {Setting up a Webex Calling Local Gateway: source note webex-calling-local-gateway-setup-ucm-security-profile},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-local-gateway-setup-ucm-security-profile},
note = {Source note webex-calling-local-gateway-setup-ucm-security-profile, checked 2026-09-24}
}