Source note · Setting up a Webex Calling Local Gateway
In the registration-based tenant, the registrar takes the Register Domain value, the credentials take the Line/Port host and Authentication Username and Password, and the outbound-proxy takes the Outbound Proxy Address, all copied from Control Hub.
Checked 2026-09-24
Ensure that you use the Line/Port host, Authentication Username and Authentication Password values respectively from the Control Hub here.
- Vendor
- Cisco
- Product
- Cisco IOS XE CUBE
- Subsystem
- Local Gateway registration
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-24
- Checked
- 2026-09-24
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Configure Webex Calling registration-based trunk, voice class tenant 100 explanations
Cite this note
APA
WarmTransfer. (2026, September 24). Setting up a Webex Calling Local Gateway: source note webex-calling-local-gateway-setup-tenant-reg-values. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-local-gateway-setup-tenant-reg-values
BibTeX
@misc{warmtransfer-claim-webex-calling-local-gateway-setup-tenant-reg-values,
title = {Setting up a Webex Calling Local Gateway: source note webex-calling-local-gateway-setup-tenant-reg-values},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-local-gateway-setup-tenant-reg-values},
note = {Source note webex-calling-local-gateway-setup-tenant-reg-values, checked 2026-09-24}
}