Source note · Setting up a Webex Calling Local Gateway

A dummy destination pattern (the Cisco example uses BAD.BAD) is required on dial-peers when outbound calls are routed using an inbound dial-peer group.

Checked 2026-09-24

A dummy destination pattern is required when routing outbound calls using an inbound dial-peer group.

Vendor: Cisco
Product: Cisco IOS XE CUBE
Subsystem: Local Gateway dial-peers
Deployment: multi-tenant
Region: not restricted
Release range: current as of 2026-09-24
Checked: 2026-09-24

Sources

Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Configure Webex Calling registration-based trunk, dial-peer 100 explanation

Cite this note

APA

WarmTransfer. (2026, September 24). Setting up a Webex Calling Local Gateway: source note webex-calling-local-gateway-setup-dummy-dest-pattern. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-local-gateway-setup-dummy-dest-pattern

BibTeX

@misc{warmtransfer-claim-webex-calling-local-gateway-setup-dummy-dest-pattern,
  title  = {Setting up a Webex Calling Local Gateway: source note webex-calling-local-gateway-setup-dummy-dest-pattern},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/claims/webex-calling-local-gateway-setup-dummy-dest-pattern},
  note   = {Source note webex-calling-local-gateway-setup-dummy-dest-pattern, checked 2026-09-24}
}

Read in context