Source note · Troubleshooting inbound calls to Webex Calling numbers
In the Local Gateway example, calls are matched to an inbound dial-peer by a voice class URI compared against the INVITE's VIA header.
Checked 2026-09-30
Specifies the voice class used to match incoming calls to this dial-peer using the INVITE VIA header URI.
- Vendor
- Cisco
- Product
- Webex Calling Local Gateway (CUBE on IOS XE)
- Subsystem
- dial-peers
- Deployment
- multi-tenant, premises-gateway
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Dial-peer configuration explanation table (incoming uri via)
Cite this note
APA
WarmTransfer. (2026, September 30). Troubleshooting inbound calls to Webex Calling numbers: source note webex-calling-inbound-call-failures-lgw-uri-via-match. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-inbound-call-failures-lgw-uri-via-match
BibTeX
@misc{warmtransfer-claim-webex-calling-inbound-call-failures-lgw-uri-via-match,
title = {Troubleshooting inbound calls to Webex Calling numbers: source note webex-calling-inbound-call-failures-lgw-uri-via-match},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-inbound-call-failures-lgw-uri-via-match},
note = {Source note webex-calling-inbound-call-failures-lgw-uri-via-match, checked 2026-09-30}
}