Source note · Setting up analog devices and ATAs on Webex Calling
The firmware images listed as supported for VG4xx ATAs on Webex Calling are IOS XE 17.18.1a universalk9 images: vg400-universalk9.17.18.1a.SPA.bin, vg4x0-universalk9.17.18.1a.SPA.bin (VG410) and vg420-universalk9.17.18.1a.SPA.bin.
Checked 2026-09-30
- Vendor
- Cisco
- Product
- Cisco VG4xx ATA
- Subsystem
- firmware
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- as listed on 2026-09-30; article dated 2026-02-03
- Checked
- 2026-09-30
Sources
- Configure your Cisco Voice Gateway VG400, VG410, or VG420 in Control Hub — Cisco · tier 2 current vendor documentation · section 'Prepare VG4xx ATA for onboarding Webex Calling', supported firmware versions table
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-vg-firmware-17-18-1a. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-vg-firmware-17-18-1a
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-vg-firmware-17-18-1a,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-vg-firmware-17-18-1a},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-vg-firmware-17-18-1a},
note = {Source note webex-calling-analog-ata-setup-vg-firmware-17-18-1a, checked 2026-09-30}
}